Paxon™ 7000 Series
Units   View this Datasheet as PDF E-Mail a Datasheet Print this Page
High Density Polyethylene Resin

Product Description
Paxon™ 7000 series of crosslinkable mHDPE resins are designed to offer outstanding ESCR, toughness, thermal, impact and notch failure resistance. These resins are ideally suited for applications that require excellent part fill during processing and outstanding finished part performance. Paxon™ 7000 series grades are all supplied with long term UV stabilization.
Key Features
AddPacks:
Paxon™ 7003 (Natural) - Pellet
Paxon™ 7004 (Natural) - 20 and 35 US Mesh Powders
Paxon™ 7203 (Black) - Pellet
Paxon™ 7204 (Black) - 20 and 35 US Mesh Powders
 
General 
Availability 1 
  • Latin America
  • North America
 
Applications 
  • Agricultural Products
  • Automotive Components
  • Chemical Storage Tanks
  • Large Refuse Containers
  • Marine Fuel Tanks
  • Recreational Vehicle - Fuel Tanks
Revision Date 
  • 01/13/2016
 
Resin Properties
Typical Value
Unit
Test Based On
Crosslink Potential
2.5
 
ExxonMobil Method
 
Thermal
Typical Value
Unit
Test Based On
Deflection Temperature Under Load (DTUL) at 66psi - Unannealed
58
°C
ASTM D648
Deflection Temperature Under Load (DTUL) at 264psi - Unannealed
38
°C
ASTM D648
 
Molded Properties
Typical Value
Unit
Test Based On
Tensile Strength at Yield (50 mm/min)
19
MPa
ASTM D638
Elongation at Yield (50 mm/min)
10
%
ASTM D638
Elongation at Break
390
%
ExxonMobil Method
Flexural Modulus - 1% Secant
760
MPa
ASTM D790B
Environmental Stress-Crack Resistance
  ASTM D1693
10% Igepal, F0
> 1000
hr
 
100% Igepal, F0
> 1000
hr
 
 
Impact
Typical Value
Unit
Test Based On
Impact Strength
  ARM
-40°C, 3.18 mm
87
J
 
-40°C, 6.35 mm
230
J
 
 
Additional Information
  • All physical properties were measured on 3 mm rotomolded samples unless a different value is shown, except for ESCR, which was measured on compression molded samples.
  • Test procedures may be modified to accommodate operating conditions or facility limitations.
 
Legal Statement
This product is not intended for use in food contact application.

This product is not intended for use in medical applications and should not be used in any such applications.
 
Notes
1Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete Country Availability.
 
For additional technical, sales and order assistance: www.exxonmobilchemical.com/ContactUs
Worldwide and the Americas
ExxonMobil Chemical Company
22777 Springwoods Village Parkway
Spring, TX 77389-1425
USA
Asia Pacific
ExxonMobil Chemical Asia Pacific
1 HarbourFront Place
#06-00 HarbourFront Tower One
Singapore 098633
Europe, Middle East and Africa
ExxonMobil Chemical Europe
Hermeslaan 2
1831 Machelen, Belgium

exxonmobilchemical.com

Typical properties: these are not to be construed as specifications.

©2024 ExxonMobil. ExxonMobil, the ExxonMobil logo, the interlocking “X” device and other product or service names used herein are trademarks of ExxonMobil, unless indicated otherwise. This document may not be distributed, displayed, copied or altered without ExxonMobil's prior written authorization. To the extent ExxonMobil authorizes distributing, displaying and/or copying of this document, the user may do so only if the document is unaltered and complete, including all of its headers, footers, disclaimers and other information. You may not copy this document to or reproduce it in whole or in part on a website. ExxonMobil does not guarantee the typical (or other) values. Any data included herein is based upon analysis of representative samples and not the actual product shipped. The information in this document relates only to the named product or materials when not in combination with any other product or materials. We based the information on data believed to be reliable on the date compiled, but we do not represent, warrant, or otherwise guarantee, expressly or impliedly, the merchantability, fitness for a particular purpose, freedom from patent infringement, suitability, accuracy, reliability, or completeness of this information or the products, materials or processes described. The user is solely responsible for all determinations regarding any use of material or product and any process in its territories of interest. We expressly disclaim liability for any loss, damage or injury directly or indirectly suffered or incurred as a result of or related to anyone using or relying on any of the information in this document. This document is not an endorsement of any non-ExxonMobil product or process, and we expressly disclaim any contrary implication. The terms “we,” “our,” "ExxonMobil Chemical" and "ExxonMobil" are each used for convenience, and may include any one or more of ExxonMobil Chemical Company, Exxon Mobil Corporation, or any affiliate either directly or indirectly stewarded.